Main content

Assembling Wearable sensor

We have introduced SC-10A to the wearable sensor assembly process.It prevented omission of parts that had not been detected by visual check.

 Settings and Devised Points           
① Select a characteristic point on the cover and set it as the anchor point.
② Check points are set at the four corners of the "O-ring“.
③ Created the cover placement jig to stabilize the check.
 Operate Flow                   
Not judged OK until the required part is installed in the correct position
──────────────── During Work ────────────────

The upper right part is not put correctly
──────────────── After Completion ────────────────

Correctly installed, and judged OK

Related Links