*Caution when running application and installer
Make sure that no suspicious files exist in the same directory before running the application or installer.
Alternatively, place the file to be executed in a trusted system directory or a newly created temporary directory before use.
| Supported cameras |
Software | File size | Supported operating systems |
Last reported update |
|---|---|---|---|---|
| FV-L030B1 FV-L200B1 FV-L500B1 |
R-CLinkCtrl_x86_103.zip, 32-bit edition | 5.41MB | WindowsXP WindowsVista Windows7 |
2012/10/05 |
| R-CLinkCtrl_x64_103.zip, 64-bit edition | 8.77MB | 2012/10/05 | ||
| EV-L500C1 | CLCtrl2_x86.msi, 32-bit edition | 1.45MB | WindowsXP WindowsVista Windows7 |
2015/08/28 |
| CLCtrl2_x64.msi, 64-bit edition | 1.49MB | 2015/08/28 |
| Version | Updated contents | ||
|---|---|---|---|
| R-CLinkCtrl 1.03 |
modified the problem that after changing to "Non-Reset" about Trigger Reset Mode and save to
EEPROM, cannot return to "V-Reset". Improved to run software as administrator mode under Windows7 |
||
| CLCtrl2 1.13 | Newly released for 5 Mega-Pixel. | ||
| Supported cameras |
Software | File size | Supported operating systems |
Last reported update |
|---|---|---|---|---|
| FV-G030B1 FV-G200B1 EV-G030B1 EV-G200B1 EV-G200C1 |
R-GigE-Package_x86_2301.exe, 32-bit edition | 70.8MB | WindowsXP WindowsVista Windows7 |
2015/05/01 |
| R-GigE-Package_x64_2301.exe, 64-bit edition | 71.6MB | 2015/05/01 |
| Version | Updated contents | ||
|---|---|---|---|
| 2.3.0.1 | Eliminated the double flipped image when image was flipped on the software. | ||
*Camera Link and GigE Vision are trademarks of the AIA (Automated Imaging Association).
Please enter your information before downloading.
| Supported cameras |
Software | File size | Supported operating systems | Last reported update |
|---|---|---|---|---|
| SC-10 Series | InstructionsEditor.2.0.0.0.zip | 100MB | Windows® 7 (32bit/64bit) Windows® 8 (32bit/64bit) Windows® 8.1 (32bit/64bit) Windows® 10 (32bit/64bit) |
2019/11/29 |
| SC-10 Series |
InstructionsEditor.1.0.0.0.zip |
642MB | Windows® 7 (32bit/64bit) Windows® 8 (32bit/64bit) Windows® 8.1 (32bit/64bit) Windows® 10 (32bit/64bit) |
2016/04/28 |
| Version | Updated contents | ||
|---|---|---|---|
| 2.0.0.0 | - Some system requirements have been fixed. - Resolution of output images of loaded data has been raised. - Some minor bugs have been fixed. | ||
| Supported cameras | Software | Version | Last reported |
|---|---|---|---|
| SC-10 Series | sc-10_EDS_5.1.zip | 5.1 | 2020/7/20 |
| Version | Updated contents | ||
|---|---|---|---|
| 5.1 | - Newly released for EtherNet/IP configure file(EDS file). |
||
Please enter your information before downloading.
| Supported cameras |
Firmware | Version | Last reported update |
|---|---|---|---|
| SC-10 Series | sc-10.5.1.2.zip | 5.1.2 | 2024/5/30 |
| SC-10 Series | sc-10.5.1.1.zip |
5.1.1 | 2023/10/30 |
| SC-10 Series | sc-10.5.1.0.zip |
5.1.0 | 2023/07/31 |
| SC-10 Series | sc-10.5.0.1.zip |
5.0.1 | 2020/10/2 |
| SC-10 Series |
sc-10.5.0.0.zip |
5.0.0 | 2020/07/20 |
| SC-10 Series |
sc-10.4.0.2.zip |
4.0.2 | 2019/11/29 |
| SC-10 Series |
sc-10.4.0.1.zip |
4.0.1 | 2019/08/30 |
| SC-10 Series |
sc-10.4.0.0.zip |
4.0.0 | 2019/08/01 |
*Warning: Back up the settings of the device and the data stored in the internal memory before recovering or updating the device, otherwise all the settings and the data will be deleted.
| Version | Updated contents | ||
|---|---|---|---|
| 5.1.2 | - Check mode is changed so that it does not respond to a long press of the enter button.
- Fixed a problem in which unintended settings were saved under certain conditions in the Anchor Point setting from the main screen. - Other minor modifications were made. |
||
| 5.1.1 | - Fixed the problem where status information could not be obtained correctly on EtherNet/IP. | ||
| 5.1.0 | - Chinese fonts have been changed to GB18030-2022-compatible.
- Fixed the problem of blackout occurring under certain conditions in socket communication.
- Fixed the problem in which port number cannot be set correctly in socket communication.
- Fixed the problem where I/O signals are not switched in some parts of socket communication. - Fixed the problem of storing images in an incorrect folder under certain conditions. - Fixed the problem where the default gateway settings are not reflected in the wireless communication. - Other minor modifications were made. |
||
| 5.0.1 | - Added EtherNet/IP function. - Fixed the problem that a specific signal of EtherNet/IP does not work properly. - Fixed the problem where the log file is not recorded correctly during N/A determinatio. - Fixed the problem of conflicting log results and image results under certain conditions. | ||
| 5.0.0 | - Added EtherNet/IP function. - Added Log output destination selection function. - Added USB audio function. - Fixed the problem that it is not displayed properly when it is replaced with a monitor with a different resolution. | ||
| 4.0.2 | - Some bugs during Socket Mode Control Function have been fixed. - Fixed the problem that operations become slow when a lot of Job IDs exist. - Some bugs related to UI, when using [Restart from the first item when failed] in [Internal Preset], have been fixed. | ||
| 4.0.1 | - GUI now supports German, French, Italian, Swedish, Polish and Korean too. - Now supports UK, QWERTZ and AZERTY keyboards. - Some minor bugs have been fixed. | ||
| 4.0.0 | - Added Socket Mode Function. - Added "Regional Settings" and "Time Correction". | ||
| 3.0.3 | Newly released. | ||
| Supported cameras | Software | File size | Supported operating systems Version |
Last reported |
|---|---|---|---|---|
| SC-20 | SC-20InstructionsEditor_1.0.0.0.zip | 360.40MB | Windows® 10（32bit/64bit）Ver.1607以上 Windows® 11（64bit） |
2023/6/15 |
Please enter your information before downloading.
| Supported cameras | Firmware | Version | Last reported update |
|---|---|---|---|
| SC-20 | sc-20_4_0_0_0.zip | 4.0.0.0 | 2024/8/7 |
| SC-20 | sc-20_2_0_0_0.zip | 2.0.0.0 | 2023/12/25 |
| SC-20 | sc-20_2_0_0_0.zip | 2.0.0.0 | 2023/12/25 |
| SC-20 | sc-20_1_2_0_0.zip | 1.2.0.0 | 2023/9/27 |
| SC-20 | sc-20_1_1_2_0.zip | 1.1.2.0 | 2023/8/4 |
| SC-20 | sc-20_1_1_0_0.zip | 1.1.0.0 | 2023/7/18 |
- Never turn OFF the power of the device while updating. The device may not start up.
- A free space of 2 GB in the built-in memory is required for performing update. The free space in the built-in memory can be checked from the [Storage Settings].
- If you perform update, the [System Log] is deleted. The other internal data is retained. Moreover, data saved by the user is also retained in the internal memory.
- Remove unnecessary devices before updating.
| Version | Updated contents | ||
|---|---|---|---|
| 4.0.0.0 |
- Added the following functions. - AI (screw head presence/absence) judgment function - Setup guide function - Mouse-over HELP (Tooltip) function - Job instruction manual images can be enlarged with additional display patterns. - The master image can be captured in the Job ID setting screen. - The Job ID setting screen has been changed so that the display status is retained. - The Job instruction image can now be deleted. - Rotation angle scores have been changed from integers to decimals. - When alias is enabled, the ID of CSV Job ID completion is changed to alias. - The initial value of the inversion setting on the sensor control screen was changed to ON. - When a timeout occurs, if the work item judgment is OK, the work item is recognized as OK. - Fixed other minor problems. |
||
| 3.0.0.2 |
- Added the following functions. - N/A judgment function - NG stop function in data input mode - Socket mode Client/Server function - The thumbnail image display has been enlarged. - The default name is now entered in advance when creating the Instruction Steps. - The storage settings have been changed so that the SYSTEM capacity is displayed. - The export format of Job ID data has been changed. - OCR function (optional) has been changed to skip special symbols. - The password input screen when canceling a suspension with a password when NG occurs has been changed so that the input characters are not visible. - When canceling the setting screen, a confirmation dialog box will not be displayed if action is not taken. - The number of decimal places for similarity scores in CSV log files has been changed to three. - Changed the notation of OK/NG in CSV log files from "1/2" to "OK/NG". - Fixed other minor problems. |
||
| 2.0.0.0 |
- Added the following functions. - Production quantity control function - Job ID extraction function - OR judgment function - Checkpoint copy function - Right-click assist function for touch panel - System initialization function - Higher speed workflow execution. - The Job ID selected on the main screen and the settings screen is synchronized. - The file dialog has been changed so that the previous information is retained. - The file dialog has been changed so that default file names are not duplicated when writing. - The master setting screen has been changed so that the selection area can be adjusted using the arrow keys on the keyboard. - The maximum magnification ratio on the master settings screen has been changed. - Added WPA3 function for wireless LAN. - The focus aid function of the installation aid can be used only when the image is displayed at equal magnification. - The default values of some settings have been changed. - Fixed other minor problems. |
||
| 1.2.0.0 | - Added camera display adjustment function. - Added print screen function. - Improved working copy handling. - Fixed an issue where the screen would become dark after restarting with certain settings. - Fixed a bug related to saving image logs. - Fixed a bug related to color recognition settings. - Fixed an issue where the app would become inoperable when canceling an update. - Reduced load processing. - Made other minor corrections. |
||
| 1.1.2.0 | - Speeded up the checkpoint matching method “Sequentiality” under specific conditions. - Fixed a memory leak issue. - Fixed an issue where characters were cut off in some languages. |
||
| 1.1.0.0 | - Added EtherNet/IP function. - The password must be set at the initial startup. - The Chinese font file has been changed (compatible with GB18030-2022). - Higher speed matching process. - Fixed the problem where the image log is saved in png format instead of jpg. - Fixed the problem where the system log overflows and the operation is unstable depending on the usage method. - Only the last checkpoint is saved in the image log when matching is " Sequentiality ". - Fixed other minor problems. |
||
| Supported cameras | Software | Version | Last reported update |
|---|---|---|---|
| SC-20 | sc-20_EDS_1.1.zip | 1.1 | 2023/7/18 |
