Skip to main content Skip to first level navigation

RICOH imagine. change.

Japan – Industrial Products Change
Skip to main content First level navigation Menu
Breadcumbs
Main content

Option

Camera Option

Camera accessories (RICOH FP series) that support RICOH FV series highly accurate performance

Cable

Connector cable compatible with Camera Link and GigE Vision

image1:Cable

【FP-CAC03】

Camera Link Cable: 3 m
Connector specs (camera end: board end)
SDR: MDR Standard thin PoCL

【FP-CAC05】

Camera Link Cable: 5 m
Connector specs (camera end: board end)
SDR: MDR Standard thin PoCL

image2:Cable

【FP-CAG03】

GigE Vision Cable: 3 m
Connector specs (camera end: board end)
Horizontal straight: Latch type

【FP-CAG05】

GigE Vision Cable: 5 m
Connector specs (camera end: board end)
Horizontal straight: Latch type


Tripod Bracket

Camera tripod bracket facilitates high-precision sensing
[Supported cameras] FV-L200B1, FV-L030B1

image:FP-TPHCA

【FP-TPHCA】


Power supply and input/output connector

A 6-pin connector for power supply and input/output signal use
[Supported cameras] FV-L500B1, FV-L200B1, FV-L030B1,FV-G200B1, FV-G030B1

image:FP-CN6PB

【FP-CN6PB】

Lens Option

Lens accessories (RICOH FP series) that maximize the high-performance of RICOH FL series and provide a variety of uses

Extension Tube Set (Macro Rings)

【FP-RGST】 6 Extensing tube ring sets

Extension tube set (Macro Rings) are inserted between the lens and camera to shift the focus point further than the mechanical limit of the lens, for close-up applications.
Different length tubes can be used in combination with each other.

  • Note: Extension Tubes are not suitable for zoom lenses. Lens will not track focus whilst zooming.

image:FP-RGST 6 Extensing tube ring sets

【FP-RGZ5】

image:RICOH FP-RGZ5
Length: 0.5 mm
Maximum diameter: 31 mm

【FP-RG01】

image:RICOH FP-RG01
Length: 1 mm
Maximum diameter: 31 mm

【FP-RG05】

image:RICOH FP-RG05
Length: 5 mm
Maximum diameter: 31 mm

【FP-RG10】

image:RICOH FP-RG10
Length: 10 mm
Maximum diameter: 31 mm

【FP-RG20】

image:RICOH FP-RG20
Length: 20 mm
Maximum diameter: 31 mm

【FP-RG40】

image:RICOH FP-RG40
Length: 40 mm
Maximum diameter: 31 mm

Macro Focus Mount

Macro focus mounts extend the flange back length by 2mm by replacing the original C-Mount of lens.

Note: Mount screw length is normally 3.5~4mm.
If the use of 2mm of Extension Tube is required, the remaining mount screw is insufficient to mount to the camera securely.
Under these circumstances use of this accessory is highly recommended.

image:FP-MUVG

【FP-MUVG】

(for FL-BC2514D-VG, FL-CC1614A-VG, FL-HC1212B-VG)

image:FP-MU2M

【FP-MU2M】

(for mega-pixel lens only)


Extender

Attaches to the rear of C-Mount lenses to double the focal length.

  • Note:
    1) When the focal length is doubled, the angle of view halves and the F no. is doubled.
    2) Resolution is lowered, contrast reduced and image sharpness reduced due to decreased depth of field.
       (There is no change in zoom ratio or minimum object distance.)
    3) Range extender cannot be attached if the rear optic protrudes by 3.7mm or more from the flange surface.
image:FP-EX2

【FP-EX2】

Focal length magnification:2X
Flange back length:17.526 mm
Weight:51g
Compatible lens:C-mount


Reverse Ring

To achieve magnification greater than 1:1, use this accessory to reverse the lens. Set comprises of a reverse ring and a shade ring.

image:FP-RR27

【FP-RR27】


Mount Adapter

Use this mount adapter to mount a C-mount lens on a CS-mount camera.

image:FP-MA

【FP-MA】