Innovations (by field)
Innovations (by product type)
2MP Camera Link™ with pre-processing functions
Handles a wide range of inspection uses, such as positioning prior to liquid crystal glass processing, circuit board mounted component checks and mounting inspection, automotive component flaw detection, medicine tablet inspection, etc.
Incorporating a strobe signal output (LVCMOS level) function for light emission use. With this function, it is possible for the user to adjust the camera exposure timing (delay, time) and light emission timing (delay, time) in accordance with the trigger input signal received by the camera.
|Imager||1/1.8" interline UXGA monochrome progressive CCD|
|Active picture elements||UXGA:1620(H)×1236(V)|
|Vertical frequency (Frame rate)||3.8599(3.8fps)/7.7198(7.6fps)/15.4397(15.3fps)Hz
in partial full scanning(default scanning mode)
|Minimum scene illumination||0.1lux at F1.2|
|Video output format||Digital 8 , 10 or 12 bit Raw Data(Base configuration)|
|Exposure time||OFF, 1 to 1/30,000 sec. (Variable at every H and clock)(3.8fps)
OFF, 1/2 to 1/60,000 sec.(Variable at every H and clock)(7.6fps)
OFF, 1/4 to 1/120,000 sec.(Variable at every H and clock)(15.3fps)
|Gain||0 to 27dB|
|Power supply||Input voltage||DC 12 Vdc ± 10%|
|Consumption||Less than 3.0W|
|Dimensions||28(W)×28(H)×40(D)mm(NOT Including the connector)|
|Lens mount||C mount|
|-5 to 50deg. C|
|-30 to 65deg. C|
*Camera Link and GigE Vision are trademarks of the AIA (Automated Imaging Association).