Skip to main content Skip to first level navigation

RICOH imagine. change.

Global – Industrial Products Change
Skip to main content First level navigation Menu
Main content




Pre-processing functions and VGA GigE Vision™ for a wide range of uses


Handles a wide range of inspections, including monochrome image measurement, defect checking, etc. Suitable for applications involving installation in various types of devices that make up a machine vision system.

  • High-speed frame rate of VGA: 90 fps
  • High image quality with a CCD global shutter
  • Camera contains automatic control functions for gain and shutter
  • Various scan modes (full, AOI) as standard features
  • Various trigger modes (pulse width, edge preset trigger) as standard features
  • Supports DC iris lens so also excellent for outdoor monitoring uses
  • Excellent for industrial uses as it handles a wide voltage range (10.8 - 26.4 V)
  • Supports updating of camera firmware via Ethernet
  • In addition to camera tripod screw holes, M4 screw holes are located on two sides (top and bottom)
    Sturdy construction for increased mounting precision
  • [Pre-processing functions] reduce PC processing burden and increase image processing performance
    [Supported cameras] FV-L200B1, FV-L030B1, FV-G200B1, FV-G030B1

On models with pre-processing functions, the camera incorporates the various image processing functions as shown below. Compared to cameras where there is an intervening board, it is possible to reduce the PC's CPU burden and increase the transfer speed.

  • [Lookup table] enables finely detailed image creation.
  • [AGC (auto gain control)] enables automatic gain adjustment in camera
  • [Auto electronic shutter control] automatically controls the shutter in response to changes in subject light intensity




Product Specifications

Imager 1/3" interline VGA monochrome progressive CCD
Active picture elements VGA:648(H)×494(V)
Cell size 7.4(H)×7.4(V)μm
Vertical frequency(Frame rate) 89.91172 Hz at full resolution
0.72028 to 360.33325 Hz adjustable via the communication
(Frame rate depends on the AOI setting)
Maximum frame rate(360.33325 Hz) is when vertical resolution AOI setting is 104.
Horizontal frequency 47.2028 kHz
Pixel frequency 36.8181 MHz
Minimum scene illumination 0.58 lux at F1.2, 89.91172 Hz
Sync. System Internal
Video output Digital 8, 10 or 12 bit Raw data
Exposure time Preset continuous mode: 10 μseconds to 16,777,215 μseconds
Preset trigger mode: 10 μseconds to 16,777,215 μseconds
Pulse width mode: 10 μseconds to Unlimited
Gain 0 to 20.4dB
Gamma Gamma 1.0(Factory default) or uploadable gamma table
Power supply Input voltage +10.8 to +26.4Vdc
Consumption Less than 5.0W
Dimensions 35(W)×35(H)×50.8(D)mm(NOT Including the connector)
Lens mount C mount
Weight Approximately 120g
Minimum Environmental temperature -5 deg. C
Maximum Camera housing temperature (top plate) shall not exceed 65℃
(This corresponds to an environmental temperature of approximately 35℃)
Storage temperature Environmental temperature -30 to 65 deg. C