Skip to main content Skip to first level navigation

RICOH imagine. change.

Global – Industrial Products Change
Skip to main content First level navigation Menu
Main content




5MP Camera Link™ with sturdy
construction and compact design


Used for the inspection of displays, solder defects and high precision flaw detection of semiconductors, liquid crystal and plasma flat panel displays, circuit boards, etc.

  • 35 mm x 35 mm compact design
  • Uses PoCL (Power over Camera Link), which has a strong track record as a high-resolution digital camera interface
  • High-speed frame rate of 5MP: 16 fps
  • Various trigger modes (pulse width, edge preset trigger) as standard features
  • In addition to camera tripod screw holes, M4 screw holes are located on four all sides
  • For increased mounting precision, mounting holes are arranged based on the CCD’s optical axis
  • Dual power alternatives, either PoCL or an external supply possible
  • [Exposure-interval signal output] emits the camera exposure interval enabling efficient inspection
    [Supported cameras] FV-L500B1, FV-L200B1, FV-L030B1, FV-G200B1, FV-G030B1

Exposure-interval signal output—which can start the next exposure during the transfer of the previous image—makes it possible to achieve high-speed work inspection*, thereby raising inspection efficiency. In addition, since the camera exposure interval is output externally, it can be used for various purposes.

  • *Limited to cases where the next exposure does not end before the completion of image transfer.




Product Specifications

Imager 2/3" interline 5.0 Mega pixels monochrome progressive CCD
Active picture elements 2448(H)×2058(V)
Cell size 3.45(H)×3.45(V)μm
Vertical frequency (Frame rate) 16Hz
Horizontal frequency 33.264kHz
Pixel frequency 64MHz
Minimum scene illumination 0.24lux at F1.2
Sync. System Internal
Video output format Digital 8 , 10 or 12 bit Raw Data (Base configuration)
Exposure time OFF, 1/8 to 1/209,000 sec. (Variable at every H and clock)
Gain 0 to 18.309dB
Gamma 1.0
Power supply Input voltage DC 12 Vdc ± 10%
Consumption Less than 4.0W
Dimensions 35(W)×35(H)×40.7(D)mm(NOT Including the connector)
Lens mount C mount
Weight Approximately 80g
-5 to 40deg. C
-30 to 65deg. C