VGA Camera Link™ with pre-processing functions
Suitable for uses such as component alignment, positioning, simple direction determination before component processing, taping and mounted device part presence/absence confirmation, etc.
On a camera with pre-processing functions, it is possible to correct luminance at all gradients using an on-board lookup table prepared by the user based on subject characteristics and inspection objectives. This also reduces the burden on the PC’s CPU and increases processing speed. In addition, the lookup table can be prepared as a CSV file and uploaded.
|Imager||1/3" interline VGA monochrome progressive CCD|
|Active picture elements||VGA:648(H)×494(V)|
|Vertical frequency (Frame rate)||31.47(30fps)/62.94(60fps)/94.784(90fps)Hz
in partial full scanning( default scanning mode)
|Minimum scene illumination||0.4lux at F1.2|
|Video output format||Digital 8 , 10 or 12 bit Raw Data (Base configuration)|
|Exposure time||OFF, 1/3 to 1/40,000 sec.(Variable at every H and clock)(30fps)
OFF, 1/7 to 1/80,000 sec.(Variable at every H and clock)(60fps)
OFF, 1/11 to 1/120,000 sec.(Variable at every H and clock)(90fps)
|Gain||0 to 27dB|
|Power supply||Input voltage||DC 12 Vdc ± 10%|
|Consumption||Less than 2.7W|
|Dimensions||28(W)×28(H)×40(D)mm(NOT Including the connector)|
|Lens mount||C mount|
|-5 to 50deg. C|
|-30 to 65deg. C|
*Camera Link and GigE Vision are trademarks of the AIA (Automated Imaging Association).